Smart Parts Ion

This product has a bulk buy option

Smart Parts Vibe - Hammer free design means that even beginning players can now afford a marker with tournament level performance, durability, and simple maintenance. Protection provided by the Vibe's all-new Max Flow R Vertical Regulator means that it is safe from the dangers of liquid CO2. Weight (marker only): 1 lb. 11 oz. Length (w/out barrel): 8.75 in. Operating Pressure: 180psi. Gas Source: HPA or CO2. Anti-Chop System: Low force bolt. Trigger Pivot: Stainless steel pin. Ball Detent: Dual rubber style. Semi auto firing mode. Max Rate of fire: 11bps. Field legal mode lock. Runs on one 9 volt battery. Standard ASA included. One piece 10 inch barrel - Feedneck: Vertical clamping. Aluminum receiver/bolt. Glass fiber reinforced nylon grip frame/body

Smart Parts SP-1 - Mil-spec accessory rails at every angle and integrated mount points for a stock, the SP-1 is ready for a limitless variety of accessories. Equipped with an integrated tactical flashlight mount right below the barrel, which accepts inexpensive focused beam flashlights at a fraction of the cost of expensive tactical flashlights. Low pressure electropneumatic operation replaces the outdated spring and hammer designs that power competing tactical markers, and allows the SP-1 to deliver a fast , accurate and quiet hailstorm of paint. Weight (marker only): 2 lbs. 6 oz. Length (w/out barrel): 12.5 in. Operating Pressure: 180psi. Gas Source: HPA or CO2. Anti-Chop System: Low force bolt. Trigger Pivot: Stainless steel pin. Ball Detent: Dual rubber style. Semi auto firing mode - Max Rate of fire: 11bps. Field legal mode lock. Runs on one 9 volt battery. Standard ASA included. One piece 10 inch barrel. Feedneck: Vertical clamping. Glass fiber reinforced nylon grip frame/body

Smart Parts Ion XE - Bolt-Out-Back design makes this Ion easier to maintain than ever before. One allen wrench is all that is needed to remove the bolt sleeve, bolt and bolt stop from the rear of the marker, providing complete access to the entire bolt and valve assembly in seconds. Weight (marker only): 1 lb. 15 oz. Length (w/out barrel): 8.5 in. Operating Pressure: 180psi. Gas Source: HPA or CO2. Anti-Chop System: Break Beam Vision. Trigger Pivot: Stainless steel pin. Ball Detent: Dual rubber style. Semi auto, rebound, 3 round burst (10bps max), full auto, (10bps max). Max Rate of fire: 17bps (higher with Blackheart board). Field legal mode lock. Runs on one 9 volt battery. Standard ASA included. Ion one piece 14 inch barrel. Feedneck: Low profile friction grip vertical / NXT thread. Aluminum / polymer grip frame/body.

Smart Parts EOS - Unique rapid-charge, low volume fire chamber and volume control inserts makes the EOS deliver high-end tournament level performance, protected from distance-robbing shoot down even at the highest rates of fire. Vision anti chop technology combined with fast and simple single tool disassembly of the entire bolt and valve system gives the EOS the reliability and fast turn around time needed in the staging pits of today's tournaments. Weight (marker only): 2 lbs. 3 oz. Length (w/out barrel): 8.4 in. Operating Pressure: 280psi. Gas Source: HPA or CO2. Anti-Chop System: Break Beam Vision. Trigger Pivot: Conical Mounted Bearing. Ball Detent: Dual rubber style. Semi auto, rebound, 3 round burst (10bps max), full auto, (10bps max). Max Rate of fire: 17bps. Field legal mode lock. Runs on one 9 volt battery. Smart Parts On/Off ASA. Includes Freak Jr. three piece 14 inch barrel. Feedneck: Vertical Q-Lock/NXT thread. Lightweight alloy grip frame/body.

SP8 - New from Smart Parts. Take the engine of an Ion, and fit it into a scenario marker, and you get the SP8!

Smart Parts Shocker NXT 07 - Comes with HE bolt stock (over 1400 shots from a 68/45). Break beam eyes. New Frame with Roller Trigger. 6000 series Aluminum for Strength and Anodizing. New Regulator Design (Highest flow rate on the market). New ASA (finger can fit around frame). Trigger pins and board pins are now screws. Recessed grip frame screws. New detent system and sculpted eye covers. Built in rail mount. Impulse threads. All American Barrel. Added feedneck threads for more durability.

CanadianPaintball.com is offering team sponsorships on NXT Shockers for teams of five or more. To see if you qualify, please email sales@canadianpaintball.com with your team resume.